Browse all practice questions for the VEX Robotics STEM Advanced Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

VEX Robotics STEM Advanced Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which of the following best describes the function of the ROBOTC firmware?
  • Why is it necessary to clear the encoder values?
  • How do you place a custom marker in the virtual world using the Measurement Toolkit?
  • What is a program in the context of robotics?
  • What would happen if a robot is set to operate with PID while at a constant speed?
  • Which combination of motor power levels is most effective for following straight lines?
  • What determines how far or how long the line tracking behavior runs?
  • What does the getMotorTargetCompleted command return when the specified motor encoder has reached the target value?
  • True or False: If you are going to use a parameter with the same value more than once in a program, it is not necessary to provide a value for the second or subsequent times you use it.
  • What does it indicate when a command appears in color when typed in ROBOTC?
  • In relation to PID, what does the ‘I’ in PID stand for?
  • True or False: The getMotorEncoder command can be compared to a good driver who slows to a stop.
  • True or False: The VEX Cortex should be powered OFF when connected to a computer.
  • How often should a robot check its motor encoder when using PID?
  • What happens if the motor power levels are set too differently when tracking a curve?
  • Which of the following does NOT affect the ability of a robot to run straight?
  • Which coding structure is executed multiple times until a condition is no longer true?
  • What defines a simple statement in programming?
  • How do you create a multi-line comment in your program?
  • Which conditions should trigger an update of the VEXnet joystick firmware?
  • Which representation of Task Main will work in ROBOTC?
  • Which of the following describes integers?
  • True or False: The encoder values should be reset every time you want to use the encoders to control a robot movement.
  • What steps must be taken to reverse a robot's direction?
  • How can the robot determine it is veering off course?
  • How can you determine the values returned by the Line Tracking Sensor?
  • What does the Master Firmware represent in the VEX Cortex?
  • The assignment of a String must include:
  • What are the steps required to use a function?
  • What is typically included after the function name when defining a function?
  • What are the two processors present in the VEX Cortex?
  • What happens if there are no more statements to run in the program?
  • Is it true that an idle loop is only used between the Autonomous and User Controlled Periods?
  • What is the correct duration to move a robot for 5 seconds in programming?
  • What should be done before running the program on the virtual robot?
  • In programming a robot, which command would effectively stop the motors?
  • What is a potential issue when using only the left sensor for tracking?
  • What does the ROBOTC firmware do?
  • When should the VEXnet joysticks be calibrated?
  • How can you combine multiple If-Else statements?
  • What is pseudocode?
  • In your program, the WHILE loop was used to control:
  • Which type of variable can store multiple values in VEX Robotics programming?
  • What are the components of a while loop?
  • If you only see "Automatic Selection" when selecting the communications port to download firmware to the Cortex, what should you do?
  • True or False: A millisecond is a millionth of a second.
  • Where do you specify a parameter in a function?
  • True or False: Logging into the Robot Virtual Worlds software allows you to save your progress.
  • True or False: When using a parameter, you must declare the type of data the parameter will hold.
  • Which of the following statements about encoders is true?
  • Which of these is an Integer?
  • What should you ensure about the firmware before using the VEXnet joystick for the first time?
  • Where must encoder wires be plugged into?
  • In the context of robotics, what does the equation Speed x Time = Distance illustrate?
  • Which aspect of the robot does the PID control primarily affect?
  • True or False: The moveMotorTarget command can be compared to a good driver who slows to a stop.
  • If the left Line Tracking Sensor sees dark, what should the robot do?
  • Are simple behaviors made up of complex behaviors? True or False?
  • What does it mean to "initialize" a variable?
  • True or False: All Line Tracking Sensors return the same values when detecting the same dark line.
  • What invalid assumption could be made about the functionality of Line Tracking Sensors?
  • When using an If Statement and the condition is true, what happens?
  • What is the role of the ROBOTC firmware in the VEX Cortex?
  • True or False: Changing the camera view can be helpful when solving a programming challenge.
  • What is a loop that checks a condition but repeats no commands called?
  • What is the main purpose of the Motors and Sensors Setup menu in ROBOTC?
  • Which of the following is not considered an analog sensor?
  • True or False: Single-line comments can greatly affect the execution of a program.
  • What does the term 'call a function' refer to?
  • Which of the following is a valid way to denote a string in many programming languages?
  • How do you incorporate a custom name into a program for motor control?
  • Which of the following is considered an improper variable name in ROBOTC?
  • True or False: The Line Tracking Sensor is not affected by ambient light.
  • What is the purpose of using parameters in functions?
  • Which function can be used to stop the robot while a program is running in ROBOTC?
  • Must all programs end with a 'Stop' command? True or False?
  • True or False: Variables should be created at the beginning of task main.
  • What is the resolution of the Integrated Encoders based on?
  • True or False: The VEX Cortex should be powered OFF when you connect it to the computer.
  • What information does the Sensor Debug Window provide?
  • How do you call a function in programming?
  • True or False: Sensor names must always contain special characters to differentiate them from motor names.
  • What effect does not clearing encoder values have on the robot's performance?
  • Why does the robot stop when it cannot detect an object?
  • When decreasing speed and increasing time, what will be the result concerning distance?
  • When tracking curved lines, how should the motor power levels be set?
  • In an If-Else statement, what does the Else branch do?
  • True or False: The VEXnet joystick firmware should be downloaded when batteries are changed.
  • How many counts correspond to one rotation of the shaft encoder?
  • What happens if the VEXnet joystick firmware is not up to date?
  • True or False: The Line Tracking Sensor gives high readings for light surfaces and low readings for dark surfaces.
  • Where should you declare a function in a program?
  • What is the Master Firmware?
  • What action should be taken if the VEX Cortex is not recognized by the computer?
  • True or False: Curly braces surround what the robot will run as part of the main program, or task.
  • What action can a robot take to self-correct its forward motion?
  • What is the purpose of using the WHILE loop in robotics programming?
  • True or False: PID should be enabled in remote control programs.
  • How does an 'IF' statement differ from a WHILE loop?
  • Why should the firmware of the VEXnet joystick be updated before its first use?
  • What is the primary function of an encoder in a robotic system?
  • In programming, what purpose do comments serve?
  • What marks the end of a multiline comment?
  • What effect does increasing the PID proportional gain have on motor control?
  • What is the primary way to debug a program in ROBOTC?
  • Which action will not allow the robot to move accurately in a straight line?
  • How can you clear the markers that have been placed in the Measurement Toolkit?
  • Which command allows access to values from the VEXnet remote control?
  • Which set of buttons is used to control the Measurement Toolkit?
  • True or False: The Integrated Encoders and Shaft Encoders share common features.
  • Which type of statement is required to end a function call in many programming languages?
  • After downloading your program and selecting a virtual robot, how do you run the program?
  • True or False: A simple statement may affect the order that statements are run, allowing the program to skip or repeat commands as needed.
  • For a left point turn with the robot configuration, which joystick movements are required?
  • True or False: A parameter is a special variable that allows you to pass data into a function.
  • Which of the following is necessary for effective line following with a robot?
  • Is it true that the Else branch must contain a condition within its square brackets?
  • Is it true that only one If Statement is required to control an arm's movement up and down?
  • What kind of information can Integrated Encoders provide?
  • Which command retrieves the current value of the Integrated Encoders?
  • Which dropdown menu allows you to launch the sample programs window?
  • What is a required part of a while loop aside from the condition?
  • How many Integrated Encoders can be daisy-chained together on a robot?
  • What happens if you don't reset encoder values before using them?
  • Which of these is not a character?
  • What range of values can the joysticks provide in VEX Robotics?
  • Which of these is not part of the function definition?
  • Which of the following best describes the functionality of the Ultrasonic Sensor?
  • What is the primary function of a shaft encoder in robotics?
  • How does the encoder influence the tracking of a curved line?
  • In programming, what is indicated by an asterisk following a multiline comment?
  • How is the robot able to calculate its speed?
  • What is a programming language?
  • What is one of the limitations of the Measurement Toolkit in terms of waypoint usage?
  • How many analog sensor ports are available on the VEX Cortex?
  • Which command is used to reset the values of the Integrated Encoders?
  • True or False: The while loop constantly checks its condition.
  • In the Labyrinth using Encoders program, which method is used to change the distance the robot travels?
  • The moveMotorTarget command is designed to:
  • True or False: ROBOTC programs can be downloaded over VEXnet.
  • What should you do if you only see Automatic Selection when selecting the communications port for your Cortex?
  • Where can you find the option to download your program?
  • Which statement is true about programming errors related to missing punctuation?
  • True or False: The VEXnet joystick firmware needs to be updated when a newer version of ROBOTC is released.
  • What is the value of the Ultrasonic Rangefinder when it cannot detect an object?
  • How does altering the encoder counts affect a robot's movement in a program?
  • What does the term 'user processor' refer to in the context of the VEX Cortex?
  • What can affect the accuracy of the Line Tracking Sensors?
  • True or False: Setting motors to full speed with PID will always yield the best results.
  • What does a shaft encoder measure?
  • How can you select different views of the robot in the Robot Virtual World software?
  • Which of the following statements is false regarding a Line Tracking Program?
  • Where can you observe the values of the motors and integrated encoders while the robot runs?
  • What is a characteristic of pragma statements?
  • If the WHILE loop were not present in the program, what would happen to the IF statements?
  • What determines whether a turn is a swing turn or a point turn?
  • What type of turn is described as one motor being stopped while the other is moving?
  • True or False: Changing the Pragma statements should always be done manually.
  • Which programming approach is best for controlling the duration of tracking behavior?
  • What begins a single-line comment in programming?
  • Which term describes a convenient way to express what the robot is doing?
  • Why are ambient conditions important for the accuracy of the Line Tracking Sensor?
  • If a motor is moving too slowly, what action does the PID speed control algorithm take?
  • True or False: A swing turn requires both motors to be actively turning in the same direction.
  • True or False: To calculate the threshold for a single Line Tracking Sensor, you add the high and low sensor values and divide by 2.
  • True or False: The Line Tracking Sensor is considered a digital sensor since it has only two conditions, light and dark.
  • What is an idle loop in programming?
  • Which format is used to organize programming logic in ROBOTC?
  • What aptly describes a point turn in robotics?
  • In programming, what does declaring a variable mean?
  • Which of these is not a string?
  • Which command would best be utilized to extend movement duration to 10 seconds?
  • How many markers, or waypoints, can be placed using the Measurement Toolkit?
  • What programming condition is crucial for establishing line tracking behavior?
  • After changing batteries in the VEXnet joystick, what action is recommended?
  • Once a motor has been given a custom name, what is required regarding its usage in programming?
  • How do Integrated Encoders connect to the VEX Cortex?
  • Which programming concept allows for the looping of a set of instructions?
  • Which component is essential for a robot to effectively communicate with a programming interface?
  • Which of these statements is true regarding the operation of a while loop?
  • Which of these is not a requirement for a parameter name?
  • What is the purpose of a While Loop when using the VEXnet remote control?
  • Is it true that ROBOTC must have a connection with the robot for the Sensor Debug Window to work?
  • What is the term for the difference between the desired speed and actual speed of a motor?
  • What value is used to represent full power on a motor?
  • Which statement is true about using three Line Tracking Sensors for a robot?
  • Which factor is irrelevant to determining wheel speed in robotic movement?
  • True or False: If you give a custom name to your motors, it must be a single word including 'Motor' with a capital M.
  • What is the purpose of 'whitespace' in programming?
  • What occurs if one paired punctuation mark, such as a parenthesis, is missing?
  • True or False: The left encoder counting down from zero indicates a programming problem.
  • True or False: The PID speed control algorithm helps the robot manage flaws in the motor and drivetrain.
  • True or False: The VEXnet joystick firmware must be downloaded every time it is used.
  • Which functionality does the PID algorithm enhance when controlling motors?
  • True or False: When the robot reaches a function call in the program, it runs the code in the body of the function.
  • How do you transfer a program from ROBOTC to the virtual robot?
  • What happens to the Ultrasonic Rangefinder’s value if it detects an object?
  • How does wheel rotation distance affect line tracking on a curve?
  • What role does the infrared LED play in the operation of the Line Tracking Sensor?
  • True or False: An IF-ELSE statement executes one portion of code if the IF statement is false.
  • What must be true for a robot to run straight?
  • True or False: Pressing the Show button in the Measurement Toolkit will activate or deactivate its features.
  • What does the returned value of the Line Tracking Sensor indicate when detecting light surfaces?
  • What facilitates communication between functions and the main program in coding?
  • What input options are available on the VEXnet remote control?
  • What functionality does the Measurement Toolkit provide in the Robot Virtual Worlds?
  • Which of these is a proper variable name?
  • What causes the robot to continue in a circle despite two motor commands?
  • How do you enable PID in ROBOTC?
  • True or False: When the robot reaches a variable in the program, it checks the value stored in the variable.
  • What modification might prevent a robot from drifting while moving straight?
  • What is the purpose of the Program Debug Window in ROBOTC?
  • Is it true that jittery arm movement can occur if one If statement turns on the motor and another Else statement turns it off?
  • After downloading your program, how can you run it on the robot?
  • To make the robot move in a circle, what should be activated?
  • What is the range of light intensity readings from the Line Tracking Sensor?
  • When using a variable, you must specify which two things?
  • What distinguishes direct mapping from indirect mapping in VEX Robotics?
  • Which of the following is NOT a characteristic of a simple statement?
  • What mechanism does the Line Tracking Sensor use to function?
  • True or False: An IF-ELSE statement allows simultaneous execution of two portions of code.
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy